The Preci Clix System

The-Preci-Clix-System1

Removable Partial Dentures

The-Preci-Clix-System2

Implant Bars

The-Preci-Clix-System3

Direct Placement Overdentures

Preci Clix Accessories and Individual Parts

Female retention caps

3 retentions for the female, just like the Hader Clips. Yellow is standard, white is reduced, and orange is increased retention. Note the sectional cuts in the females, which allow for the female to flex over the height of contour and engage the undercuts of the sphere.

Yellow Females
Standard (6-Pack)

White Females
Reduced (6-Pack)

Red Females
Increased (6-Pack)

Available in Combo Pack (#1234), or packages of 6 for yellow (#1231), orange (#1233), and white (#1232).

White = 1.7lbs retention
Yellow = 2.5 lbs retention
Orange = 3.3 lbs retention

The-Preci-Clix-System4

1231                       1232                        1233

The-Preci-Clix-System4

1234 Combo Kit (2+2+2)

Preci Clix Housing (#1235)

Ultra thin TITANAX housing with gold colored anodization for polymerization into acrylic resin.

  • Use the 1251B Space Maintainer
  • Do NOT solder
  • TI Grade 5
  • Height 2.65mm
  • Thickness 0.2mm
  • 4mm Ø
The-Preci-Clix-System5

Preci Clix Complete Female (#1240)

Ultra thin TITANAX housing with gold colored anodization for polymerization into acrylic resin.

  • Use the 1251B Space Maintainer
  • Do NOT solder
  • One TI housing
  • One standard (yellow) female

The Preci Clix is compatible and widely used with ball abutments (2.25mm) from the following Implant Companies:

3I Implant Innovations
Astra Tech
Bego Semados
BTI
BT Lock SRL
Camlog
Dyna

Innova / Sybron
ITI Straumann
Lifecore / Keystone
Medentis Medical
MIS
Nobel Biocare
Osteo Implant

Preci Clix (1291C) Post

Cementable post in Titanax with threaded base for the 1206C male.

Use the Preci Clix Burr Set to prepare the canal. The REH2 is used for cementation.

  • TI Grade 5
  • Post Length: 7mm
  • Post Base Ø : 3.4mm
  • Post Ø : 1.35mm
The-Preci-Clix-System7

Preci Clix (1293C) Post

Cementable post in Titanax.

Use the Preci Clix Burr Set to prepare the canal.

  • TI Grade 5
  • Post Length: 7mm
  • Post Base Ø : 3.4mm
  • Post Ø : 1.35mm
  • Ball Ø : 2.25mm
The-Preci-Clix-System8

Preci Clix REH17 Protection Cap

TI Protection cap for 1291 and 1261 threaded posts and base rings.

Utilizes same Hex Driver as 1206C and 1206CL balls.

Preci Clix Male Keeper (RE04TI)

Plastic male keeper (0º, 30º, 45º, and 60º) for extracoronal and axial constructions. Adaptable in form and length.

Use the REP7 paralleling mandrel for the cementable 1271C Male; or assemble with the 1281C male and use the 1201P Paralleling Mandrel.

  • Burn-out Plastic
  • Internal Ø : 2.35mm
  • External Ø : 3.40mm
The-Preci-Clix-System10

Preci Clix (RA0063) Threaded Base Ring

The-Preci-Clix-System11

Threaded base ring for direct casting, soldering, or laser welding. For use with the 1206C Clix Male.

  • 1206C Clix Male
  • Use the REP4 paralleling mandrel
  • High Fusing IRAX alloy (1400-1600º C)
  • Height : 1.30mm, External Ø : 3.40mm

RE 4600 TI

The-Preci-Clix-System12

Threaded TI base ring for bonding into cast/milled structure.

  • 2mm thread for use with Preci Clix 1206C male.
  • Use Ceka Bond and the Clix Screwdriver.

Preci Clix Threaded Male (1206C)

The-Preci-Clix-System13

Threaded, removable male for use with the 1291C post, or the RA 0063 base ring.

  • Use Ceka Bond and the Clix Screwdriver
  • PALLAX alloy (1055-1130º C)
  • Height : 2.80mm (includes threads)
  • 2.25mm Ø sphere
  • Internal Hex: 0.9mm

Preci Clix Threaded Male LONG (1206CL)

The-Preci-Clix-System14

Special titanium male with 0.3 mm longer threading

  • Height : 3.10mm (includes threads)
  • 2.25mm Ø sphere
  • Internal Hex: 0.9mm

Preci Clix Castable Male (1281C)

The-Preci-Clix-System15

Spherical plastic male for casting.

Use the 1201P paralleling mandrel, pour only in hard alloy, and polish to a high shine using the 1230 cup bur.

  • Green burn out plastic
  • Height : 3.95mm
  • Ball Height: 2.05mm
  • 2.25mm Ø sphere

Preci Clix Male (1271C)

The-Preci-Clix-System16

Spherical male for cementation into a cast male keeper.

  • Use Ceka Site
  • TI Grade 5
  • Height : 3.95mm
  • Ball Height: 2.05mm
  • 2.25mm Ø sphere

Preci Clix Castable (1205C)

Spherical plastic male for incorporation into post copings and for castings.

Use the 1201P paralleling mandrel, pour only in a hard alloy, and polish to a high shine using the 1230 cup bur.

  • Green Burn out plastic
  • Height : 2.40mm
  • Base Ø : 3.20mm
  • 2.25mm Ø sphere
The-Preci-Clix-System17

Preci Clix Small Spacer (1251B)

The Preci Clix System25

Elastic space maintainer to be always placed between the male and female during processing.

  • Rubber Ring
  • Height : 0.70mm
  • 1.80mm Ø

Preci Clix Large Spacer (RA0055)

The-Preci-Clix-System19

Pliable, Large Tin space maintainer to be placed on to the post coping during polymerization. Easily adaptable to fit the post coping.

  • Tin Foil
  • Thickness : 0.50mm
  • 14.0mm Ø

PRECI-CLIX DUPLICATING DUMMY – 123

Duplicating dummy of self-isolating plastic for cast metal partial frames. No space maintainer required during processing.

  • Pkg 6
  • Height: 2.8 mm
  • 3.55 mm Ø
The-Preci-Clix-System20

Clix Impression tool (RE H2)

The-Preci-Clix-System21

Used to hold the 1291C post during cementation, and for impression taking of the 1291C post or RA0063 base ring. Package of 2.

Clix female analogue (RE H14)

The-Preci-Clix-System22

To be used in combination with the RE H2 tool. This component is the female analogue for laboratory processing. Package of 2.

Clix Model Analogue (1201D)

The-Preci-Clix-System23

Metal analogue to be indexed in the working model for laboratory processing. Works well with 1271, 1281, and 1251 attachments. Packages of 2.

Preci Clix Screwdriver (IMP-XS-042)

The-Preci-Clix-System24

Used to insert and remove the 1206C Preci Clix threaded male. 1 piece per package.

Clix Female Insertion Tool (1222)

Tool for inserting the Clix females into the Clix metal housing. Packaged individually.

Clix Male Paralleling Mandrel (1201P)

The-Preci-Clix-System27

For use with the 1251, 1271, and 1281 Clix males. Packaged individually

Adjustable Paralleling Mandrel used to parallel Clix females.

  • Packaged individually
The-Preci-Clix-System27

Base Ring Paralleling Mandrel (RE P4)

The-Preci-Clix-System28

Threaded mandrel to place the RA 0063 base ring. Packaged individually.

Clix Paralleling Mandrel (RE P7)

The-Preci-Clix-System29

Adjustable mandrel used to place all Clix green female castable keepers. Packaged individually.

Preci Clix Cup Bur (1230)

This cup burr is used with the castable Clix males to finish the cast sphere.

The cup burr maintains the circular shape of the sphere and produces a smooth finish for less wear on the female component.

2 per Package

The-Preci-Clix-System30

Preci Clix Bur Set (1226)

Top: Pre-Drilling Bur (#1227) used for root canal preparation.
Middle: Cavity Bur (#1228) to prepare the canal for the base of the 1291C post.
Bottom: Precision Reamer (#1229), used to calibrate the diameter for the 1291C post.

Available as a set of 3, or individually.

The-Preci-Clix-System31

Preci Clix Lab Tool Kit (1298)

Clix Laboratory tool kit contains all accessories needed to process both axial and extracoronal Clix attachments:

  • one 1222 female insertion tool
  • one REP7 keeper paralleling mandrel
  • one 1201P male paralleling mandrel
  • one 1230 cup bur
The-Preci-Clix-System32

Ceka Bond

Anaerobic adhesive used to prevent gradual loosening of threaded components. Apply only to degreased and dry threads. Allow to set for 5 minutes.

Use with 1206C threaded Clix male as well as all threaded devices such as orthodontic appliances, implant abutments, and implant screws.

The-Preci-Clix-System33

Ceka Site

Anaerobic bonding composite for fixing Titanax retention parts or other cementable parts. Apply a 1:1 mix to a dry, lightly sandblasted surface. Allow to harden for 10 minutes. Use when affixing all metal to metal components.

Make sure to do a fresh mix for each side/unit.

Ceka Site has an identical function to our Nimetic cem (Anaerobic adhesive).

  • identical colour
  • identical processing
  • identical purpose

All former Nimetic Cem users can use CEKA SITE with the exact same protocol.

The-Preci-Clix-System34

Name
Email Address
I am a...
We do not send spam, will not share any of your information, nor will we inundate your inbox!
X
X