Sphero Flex & Sphero Block

Sphero Block for Implants

Sphero Block (Micro)

Implant abutment overdenture system with 1.80mm Ø sphere.

Requires 3.5mm vertical, 4.2mm Ø

Included are one metal housing, two pink retention caps, and one tin spacer.
Tools needed: Flex/Block Insertion Tool, Cap Insertion Tool

Sphero Block (Standard)

Implant abutment overdenture system with 2.5mm Ø sphere.

Requires 4.0mm vertical, 4.8mm Ø

Included are one metal housing, two pink retention caps, and one tin spacer.
Tools needed: Flex/Block Insertion Tool, Cap Insertion Tool

Sphero Flex for Implants

Self-paralleling implant abutment overdenture system with 2.5mm Ø sphere.

Requires 4.0mm vertical, 4.8mm Ø

Free rotation of 7.5º for one abutment, 15º degrees for more than one.

Included are one metal housing, two pink retention caps, 3 directional rings, and one tin spacer.

When ordering, please provide:

  • Implant manufacturer and model
  • Diameter of implant
  • Hex of implant (internal/external)
  • Cuff height desired (see 2nd picture), from 1mm to 7mm

Tools needed:
Flex/Block Insertion Tool, Cap Insertion Tool

Black: For Processing
Black: For Processing
Green: Soft, Gummy
for Pt. Comfort (200 Grams)
Orange: For Worn Spheres
Elastic Retention (200 Grams)
Light Green: For Worn Spheres
Rigid Retention (1100 Grams)
Yellow: Low Retention
Yellow:
Pink: Medium Retention
Pink
White: High Retention
White
0800194-Sphero-Cap-Insertion-Tool-500x600
Cap Insertion Tool: For use w.
Standard and Micro Caps

Sphero Stainless Cap Housing

For incorporation into acrylic denture resin –
Both micro and standard sizes available

 

Sphero Stainless Caps

Sphero System Analogue

For processing – Both standard and micro sizes available

 


Sphero Flex/Block Insertion Tool

For insertion of both Sphero Block and Sphero Flex abutment –
May be utilized with Sphero Block 2.5 and 1.8

 


Name
Email Address
I am a...
We do not send spam, will not share any of your information, nor will we inundate your inbox!
X
X