Shiner SR System Kits and Components

** Limited Parts are Available for Servicing Existing Cases. Contact PREAT at 800-232-7732 for inquiries. **

Shiner SR System Kits and Components1

Shiner Regular Magnets

Regular Dimensions3.4 mm vertical ↕, 5.5 mm diameter Ø

Shiner SR System Kits and Components2

Shiner Mini Magnets

Mini Dimensions2.4 mm vertical ↕, 3.9 mm diameter Ø

Individual Magnet Components

Shiner Regular Magnet

Dimensions

  • 3.4 mm vertical ↕
  • 5.5 mm diameter Ø
  • 1.5lbs of retention per attachment

Do not process directly to the magnet. Always use the processing piece.

Shiner SR System Kits and Components1

Shiner Regular Processing Piece

Do not process directly to the magnet. Always use the processing piece. Using the Shiner tool, thread out the processing piece and thread in the magnet.

Shiner-SR-Magnets-Kits28

Shiner Impression Piece

Used as transfer for indirect processing of new root and implant cases, and also for relines.

Use with the Shiner model piece.
Used for both Regular and Mini magnet systems.

Shiner-SR-Magnets-Kits29

Shiner Model Piece

Used as female analogue for model in indirect processing of new root and implant cases, and also for relines.

Use with the Shiner impression piece.
Used for both Regular and Mini magnet systems.

Shiner-SR-Magnets-Kits31

Shiner Regular Toothpiece

Dimensions

  • 4.0mm diameter
  • 6.9mm length

May be used directly in tooth/root, or incorporated into cast coping. Use the Shiner Pilot Diamond and Regular Sizing Diamond.

Shiner-SR-Magnets-Kits33

Shiner Implant Keeper

Custom fabricated to thread into the implant.

When ordering, please provide:

  • Implant manufacturer and model
  • Diameter of implant
  • Hex of implant (internal/external)
  • Cuff height desired, from 2.5mm to 6.5mm

Works with both regular and mini magnets.

Shiner-SR-Magnets-Kits35-300x160

Shiner Mini Magnet

Dimensions

  • 2.4 mm vertical ↕
  • 3.9 mm diameter Ø
  • 1.0lbs of retention per attachment

Do not process directly to the magnet. Always use the processing piece.

Shiner SR System Kits and Components2

Shiner Mini Processing Piece

Do not process directly to the magnet. Always use the processing piece. Using the Shiner tool, thread out the processing piece and thread in the magnet.

Shiner-SR-Magnets-Kits38

Shiner Mini Toothpiece

May be used directly in tooth/root, or incorporated into cast coping. Use the Shiner Pilot Diamond and Mini Sizing Diamond.

Dimensions: 3.5mm diameter, 3.6mm length

Shiner-SR-Magnets-Kits39
Shiner-SR-Magnets-Kits40

Shiner Regular Tool

Use the Shiner Regular tool to thread out the processing piece and thread in the magnet.

Shiner-SR-Magnets-Kits41

Shiner Mini Tool

Use the Shiner Mini tool to thread out the processing piece and thread in the magnet.

Shiner-SR-Magnets-Kits42

Shiner AF Bur

Use the Shiner AF Bur to remove acrylic resin and create a “tunnel” for the removal of the processing piece and insertion of the magnet.
Used for both Regular and Mini magnet systems.

Shiner-SR-Magnets-Kits43

Shiner Hex Driver

Use the Shiner Hex Driver to thread in the Shiner implant abutments.

Used for both Regular and Mini magnet systems.

Shiner-SR-Magnets-Kits44-300x140

Shiner Pilot Drill

Use the diamond Shiner Pilot Drill to create a canal for the Shiner Regular and Mini magnet toothpieces.

Used for both Regular and Mini magnet systems.

Shiner-SR-Magnets-Kits45-300x140

Shiner Regular Sizing Diamond

Use the Shiner Regular Sizing Bur to create a recess for the Shiner Regular toothpiece.

Shiner-SR-Magnets-Kits46

Shiner Mini Sizing Diamond

Use the Shiner Mini Sizing Bur to create a recess for the Shiner Mini toothpiece.

Shiner-SR-Magnets-Kits47

Shiner Casting Insert

Use the Shiner Casting Insert in both the Regular and Mini toothpieces when fabricating a cast coping.


Name
Email Address
I am a...
We do not send spam, will not share any of your information, nor will we inundate your inbox!
X
X