Preci Clix

The All A-Round Ball that really Clicks!

All previous balls–on overdentures for roots and implants, on crowns for removable partial dentures, and on top of bars for implant or root supported bridges–engaged the height of contour of the sphere to provide retention. This small area, or band of retention, may lead to early attachment wear and possibly frequent adjustment or replacement of the female unit.

The Clix design allows the female to engage all around the ball for an increased area of retention.Besides far greater retention than other spherical systems, the Clix offers the patient security of an audible click.

clix.h10CR
art1291-3d-partielCR

Less wear. Less servicing. Less replacement of worn females.

When servicing is required, three retentions of females are available, along with the option of replacing the threaded sphere.

Another unique feature of the Preci Clix System is the availability of a female paralleling mandrel. If the attachments are not parallel, the correction may be made by paralleling the female without sacrificing any retention or stability.

Preci-Clix3-300x135

Non-parallel females have a difficult path of insertion and removal, leading to increased wear on the attachment. The non-parallel females do not allow the prosthesis to rotate.

Preci-Clix4-300x135

Parallel females have an easy path of insertion and removal, decreasing wear on the attachment. This also allows the prosthesis to freely rotate.30º is about the maximum divergence where the Clix females can still engage the undercut of the sphere.

Increased options and techniques for fixing the sphere to a crown, coping, root, or bar.

The basic premise of this attachment is to allow the user flexibility. The user can make an overdenture stud, overdenture bar, and 30, 45, or 60 degree (assures the best tooth and tissue alignment while reducing forces, assuring good hygienic access, and allowing maximum space for the removable partial denture) extracoronal partial denture from the same simple kit.

Preci-Clix5
Preci-Clix6
Preci-Clix7

Clix Attachment and Kit Listing

#1251 Preci Clix ATI

Axial attachment with plastic male for incorporation into post copings or bars. The 1230 cup bur is recommended to finish the cast sphere. Do NOT sandblast the sphere. This leaves the ball rough, causing extreme wear. Rubber wheeling and high polishing often leave a ball that is out of shape, no longer fitting the female. Instead, remove the investment with an acid substitute or glass beads.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

SphereHeight 2.40mm, 2.25mm Ø sphere

Preci-Clix8

#1261 Preci Clix CV

Overdenture attachment with replaceable male and female components. The user may cast, solder, or laser weld the threaded base ring into either a coping or bar. The sphere then threads into the base ring. Using Ceka Bond will stop any potential gradual unthreading of the male.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

Sphere2.25mm Ø, 0.9mm internal hex

Base Ring1.3mm ↕ vertical, 3.40mm Ø

Preci-Clix9

#1265 Preci Clix TI

Overdenture attachment with replaceable male and female components. The user may laser weld the Titanium threaded base ring into either a coping or bar. The sphere then threads into the base ring. Using Ceka Bond will stop any potential gradual unthreading of the male.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

Sphere2.25mm Ø, 0.9mm internal hex

Base Ring1.3mm ↕ vertical, 3.40mm Ø

Preci-Clix10

# 1271 Preci Clix Ti-Ti

This “all-in-one” attachment can be used for removable partial dentures, bridges, overdenture studs, and overdenture bars. The green plastic patterns may be cast in any dental alloy, and the titanium male is then bonded in with Ceka Site.

This allows the user the convenience of direct casting and an accurate, smooth ball.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

Sphere 2.25mm Ø

Plastic KeepersInternal Ø: 2.35mm External Ø : 3.40mm

Preci-Clix11

# 1276 Preci Clix Ti-V

This “all-in-one” attachment can be used for removable partial dentures, bridges, overdenture studs, and overdenture bars. The green plastic patterns may be cast in any dental alloy, and the titanium threaded male is bonded in with Ceka Site, and the 1206C male simply threads in for maximum incorporation possibilities.

This allows the user the convenience of direct casting and a replaceable accurate, smooth ball.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

Sphere2.25mm Ø

Plastic KeepersInternal Ø : 2.35mm External Ø : 3.40mm

Preci-Clix12

#1281 Preci Clix TI-P

The same attachment as the Preci Clix 1271 Ti-Ti with one difference: a castable sphere pattern. The 1230 cup bur is recommended to finish the cast sphere.

Do NOT sandblast the casting. This leaves the ball rough, causing extreme wear. Rubber wheeling and high polishing often leave a ball that is out of shape, no longer fitting the female. Instead, remove the investment with an acid substitute or glass beads.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

Sphere2.25mm Ø

Plastic KeepersInternal Ø : 2.35mm External Ø : 3.40mm

Preci-Clix13

#1291 Preci Clix RTI

Direct placement overdenture with titanium post. Three specially calibrated burs are used to prepare the canal. Glass ionomer is used to secure the post. The sphere threads directly into the post. The female may be picked up intra-oral or laboratory processed into the prosthesis.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

Sphere2.25mm Ø, 0.9mm internal hex

Post7.0mm length, 1.3mm post Ø, 3.4mm base Ø

Preci-Clix14

#1293 Preci Clix RCT

Direct placement overdenture with titanium ball and post. Three specially calibrated burs are used to prepare the canal. Glass ionomer is used to secure the post. The female may be picked up intra-oral or laboratory processed into the prosthesis.

Total vertical required: 4.0mm

HousingHeight 2.65mm, 4.00mm Ø

Sphere2.25mm Ø

Post7.0mm length, 1.3mm post Ø, 3.4mm base Ø

Preci-Clix15

Clix Starter Kits

Preci Clix 1251 Starter Kit

1251 Kit Includes:

  • 1251 attachments (2)
  • 1222 female insertion tool (1)
  • 1201P Male paralleling mandrel (1)
  • 1230 Cup Bur (2)
Preci-Clix16-463x348

Preci Clix 1261 Starter Kit

1261 Kit Includes:

  • 1261 attachments (2)
  • 1222 female insertion tool (1)
  • Ceka Bond (1 tube)
  • Clix male screwdriver (1)
  • REP4 base ring paralleling mandrel (1)
Preci-Clix17

Preci Clix 1265 Starter Kit

1265 Kit Includes:

  • 1265 attachments (2)
  • 1222 female insertion tool (1)
  • Ceka Bond (1 tube)
  • Ball hex driver (1)
  • REP4 base ring paralleling mandrel (1)
Preci-Clix18

Preci Clix 1271 Starter Kit

1271 Kit Includes:

  • 1271 attachments (2)
  • 1222 female insertion tool (1)
  • Ceka Site anaerobic composite (1 kit)
  • 1201P Male paralleling mandrel (1)
  • RE P7 green pattern paralleling mandrel (1)
Preci-Clix19

Preci Clix 1276 Starter Kit

1276 Kit Includes:

  • 1276 Complete attachments (2)
  • 1222 female insertion tool (1)
  • Ceka Site anaerobic composite (1 kit)
  • RE P7 green pattern paralleling mandrel (1)
  • REP4 threaded insert mandrel (1)
  • IMPXS042 Hex screwdriver (1)
Preci-Clix20

Preci Clix 1281 Starter Kit

1281 Kit Includes:

  • 1281 attachments (2)
  • 1222 female insertion tool (1)
  • RE P7 green pattern paralleling mandrel (1)
  • 1230 Cup Bur (1)
Preci-Clix21

Preci Clix 1297 Starter Kit

1297 Kit Includes:

  • 1293 attachments (2)
  • 1222 female insertion tool (1)
  • Clix Female combo pack (2 of each color)
  • 1226 bur set
  • 1201D Ball Analogue (2)
Preci-Clix22

Preci Clix 1299 Starter Kit

1299 Kit Includes:

  • 1291 attachments (2)
  • REH2 Impression Tool (2)
  • REH14 Female Analogue (2)
  • 1222 female insertion tool (1)
  • Clix Female combo pack (2 of each color)
  • 1226 bur set
  • Clix male screwdriver (1)
  • Ceka Bond (1 tube)
Preci-Clix23

Name
Email Address
I am a...
We do not send spam, will not share any of your information, nor will we inundate your inbox!
X
X