Locator Root Attachment Kits

The Self-Aligning feature of the LOCATOR attachment allows a patient to easily seat their overdenture without the need for accurate alignment of the attachment components.

The unique Dual Retention innovation provides the LOCATOR attachment with greater retention surface area than ever available before with other attachments.

Durability tests have proven the LOCATOR’s incredible wear resistance and long lasting performance for over 110,000 insertion cycles.

The LOCATOR Male pivots in its permanent metal denture housing for a genuine resilient connection of the prosthesis. The retentive nylon male remains in static contact with the female socket while its metal denture cap has a full range of rotational movement over the male. This design of the pivoting LOCATOR Male allows a resilient connection for the overdenture without any resulting loss of retention.

The LOCATOR attachment is a supra-radicular design that gives you the choice of a straight post, two angles (10 and 20 degrees) to accommodate divergent roots and a special Cast-to version. Plus three different retentive males allow for your choice of regular retention (white), light retention (pink) or extra-light retention (blue) according to the needs of the patient.

Locator-Root-Attachment-Kits1

Locator Kit Listing

8011 – LOCATOR STARTER KIT (4 ROOTS) WITH DRILLS

Kit contains: (4) Locator 0º Degree Females, (4) Male Processing Package (Denture Cap with Black Processing Male, Clear Nylon Male (5lbs), Pink Nylon Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer), Pilot Drill, Spot-Face Drill and (2) Parallel Post.

Width of the root surface must equal or exceed 4.0mm.

Also Order: Locator Core Tool (8393) required for placement procedure. Locator Root Analog (8516) if dental laboratory is processing the Locator Denture Cap Male into the denture.

Locator-Root-Attachment-Kits1-1

8010 – LOCATOR STARTER KIT REFILL (4 ROOTS) NO DRILLS

Kit contains: (4) Locator 0º Degree Female, (4) Male Processing Package (Denture Cap with Black Processing Male, Clear Nylon Male (5lbs), Pink Nylon Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer) and (2) Parallel Post

Locator-Root-Attachment-Kits2-1

8051 – LOCATOR COPING KIT (4 ROOTS) WITH DRILLS

Kit contains: (4) Locator 0º Degree Cast-To Female, (4) Male Processing Package (Denture Cap with Black Processing Male, Clear Nylon Male (5lbs), Pink Nylon Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer), Pilot Drill, Spot-Face Drill and (2) Parallel Post.

Note: The majority of the outer surface on the base of the Locator Cast-To Female must remain above the level of the coping to allow the male to snap in without interference. Root surface must equal or exceed 4mm.

Also Order: Locator Core Tool (8393) required for placement procedure. Locator Root Analog (8516) if dental laboratory is processing the Locator Denture Cap Male into the denture.

Vertical Requirement: 4mm

Locator-Root-Attachment-Kits3-1

8050 – LOCATOR COPING KIT REFILL (4 ROOTS) NO DRILLS

Kit contains: (4) Locator 0º Degree Cast-To Female, (4) Male Processing Package (Denture Cap with Black Processing Male, Clear Nylon Male (5lbs), Pink Nylon Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer) and (2) Parallel Post.

IMPORTANT NOTE: Do not allow the casting temperature to raise above 2000 F which will melt the stainless steel female. Do not use a bur to remove investment, sandblasting with aluminum oxide, or an acid pickling solution, can damage the internal socket of the female attachment.

Locator-Root-Attachment-Kits4-1

8071 – LOCATOR MIXED KIT (4 ROOTS) WITH DRILLS

Kit contains: (2) Locator 0º Degree Females, (1) 10º Degree Female, (1) 20ºDegree Female, (4) Male Processing Package (Denture Cap with Black Processing Male, Clear Nylon Male (5lbs), Pink Nylon Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer), Pilot Drill, Spot-Face Drill and (2) Parallel Post.

Width of the root surface must equal or exceed 4.0mm.

Also Order: Locator Core Tool (8393) required for placement procedure. Locator Root Analog (8516) if dental laboratory is processing the Locator Denture Cap Male into the denture.

Locator-Root-Attachment-Kits5-1

8070 – LOCATOR MIXED KIT REFILL (4 ROOTS) NO DRILLS

Kit contains: (2) Locator 0º Degree Female, (1) 10º Degree Female, (1) 20º Degree Female, (4) Male Processing Package (Denture Cap with Black Processing Male, Clear Nylon Male (5lbs), Pink Nylon Male (3lbs) Blue Nylon Male (1.5lbs), and Block-Out Spacer) and (2) Parallel Post.

Locator-Root-Attachment-Kits6-1

Name
Email Address
I am a...
We do not send spam, will not share any of your information, nor will we inundate your inbox!
X
X