Multi-Unit Components


Project Description

Multi-Unit Components and Abutments

Based on the Nobel Prosthetic Interface

Multi-Unit Abutment Analog

  • Titanium analog
  • Available in the following quantities: Individual, 10-Pack, 25-Pack, 100-Pack
  • Multi-Unit Analog (10-Pack)

    Individually priced at $16.00/unit, priced in a package of ten for $14.00/unit — that’s over 10% savings!

    $140.00
  • Multi-Unit Analog (25-Pack)

    Individually priced at $16.00/unit, priced in a package of twenty-five for $13.00/unit — that’s a nearly 20% savings!

    $325.00
  • Multi-Unit Analog (100-Pack)

    100-Pack for $12/unit (Regular Pricing $16/unit)

    That’s a 25% savings!

     

    $1,200.00

Multi-Unit Open-Tray Impression Coping

  • with TI guide pin

Multi-Unit Closed-Tray Impression Coping

Multi-Unit Plastic Coping

  • 8003710

Multi-Unit Gold/Plastic Coping

  • with TI guide pin

Multi-Unit Gold Bar Coping

  • with TI guide pin

Multi-Unit Temporary Cylinder

  • Titanium abutment with prosthetic screw
  • Available in the following quantities: Individual, 10-Pack, 50-Pack, 100-Pack

Bidra Conversion Smart Polishing Cap

  • A must have for your next conversion from removable to a fixed prosthesis.
  • This item is also available in a 4-Pack for $100.00, that’s 20% savings!
  • Part #9003704
  • Bidra Conversion Smart Polishing Cap

    A must-have for your next conversion from removable to a fixed prosthesis, introducing the Bidra Conversion Smart Polishing Cap!

    Read The Journal of Prosthetic Dentistry Article featuring the Bidra Conversion Caps here.

    Existing polishing caps only protect the inside of the coping, not the outside! After seeing the poor results with existing products, Avinash S Bidra, D.D.S., M.S., F.A.C.P., Director, UCONN Post-Graduate Prosthodontics, designed this innovation with the Dental Professional in mind.  With an extended metal rim, the Bidra Conversion Smart Polishing Cap fully protects both the inside and outside of the metal coping, preventing damage to the coping during pickup, trimming, polishing and finishing the prosthesis.

    External rough areas attract food, plaque, and bacteria and may lead to soft tissue inflammation and bone loss around the implants. Eliminate the headaches with the easy-to-use Bidra Conversion Smart Polishing Cap from PREAT Corporation.

    Made of titanium.

    This item is also available in a 4-Pack (see below) for $100.00, that’s 20% savings!

    $30.00
  • Bidra Conversion Smart Polishing Cap (4-Pack)

    A must-have for your next conversion from removable to a fixed prosthesis, introducing the Bidra Conversion Smart Polishing Cap!

    Read The Journal of Prosthetic Dentistry Article featuring the Bidra Conversion Caps here.

    Existing polishing caps only protect the inside of the coping, not the outside! After seeing the poor results with existing products, Avinash S Bidra, D.D.S., M.S., F.A.C.P., Director, UCONN Post-Graduate Prosthodontics, designed this innovation with the Dental Professional in mind.  With an extended metal rim, the Bidra Conversion Smart Polishing Cap fully protects both the inside and outside of the metal coping, preventing damage to the coping during pickup, trimming, polishing and finishing the prosthesis.

    External rough areas attract food, plaque, and bacteria and may lead to soft tissue inflammation and bone loss around the implants. Eliminate the headaches with the easy-to-use Bidra Conversion Smart Polishing Cap from PREAT Corporation.

    Made of titanium.

    $100.00

Bidra Conversion Smart Polishing Cap (Low Profile)

  • PREAT Corporation introduces the second generation Bidra Conversion Smart Polishing Cap for your next full arch implant conversion.
  • The second generation Bidra Conversion Smart Polishing Cap now has a 2.7mm vertical profile for use on a lathe wheel.
  • A slot on the top assists in easy removal with a standard lab plaster knife.
  • Bidra Conversion Smart Polishing Cap (Low Profile)

    Introducing the second generation Bidra Conversion Smart Polishing Cap for your next full arch implant conversion. External rough areas attract bacteria and may lead to soft tissue inflammation and bone loss around the implants.  Existing polishing caps only protect the inside of the coping, not the outside!  The second generation Bidra Conversion Smart Polishing Cap now has a 2.7mm vertical profile for use on a lathe wheel. A slot on the top assists in easy removal with a standard lab plaster knife.

    Read The Journal of Prosthetic Dentistry Article featuring the Bidra Conversion Caps here.

    This item is also available in a 4-Pack (see below) for $100.00, that’s 20% savings!

    $30.00
  • Bidra Conversion Smart Polishing Cap (Low Profile) (4-Pack)

    Introducing the second generation Bidra Conversion Smart Polishing Cap for your next full arch implant conversion. External rough areas attract bacteria and may lead to soft tissue inflammation and bone loss around the implants.  Existing polishing caps only protect the inside of the coping, not the outside!  The second generation Bidra Conversion Smart Polishing Cap now has a 2.7mm vertical profile for use on a lathe wheel. A slot on the top assists in easy removal with a standard lab plaster knife.

    Read The Journal of Prosthetic Dentistry Article featuring the Bidra Conversion Caps here.

    $100.00

Multi-Unit Abutment Blue Light Scan Body

Multi-Unit Titanium Base

  • Titanium abutment with prosthetic screw
  • Designed for bonding to ceramic crowns, bridges, and FCZ implant bridges.
  • 8003760-Multi-Unit-TI-base

    Multi-Unit Non-Engaging Titanium Base w/ .050 Screw

    Multi-Unit Non-Engaging Titanium Base w/ .050 Screw. Product # 8003760

    Titanium base for multi-unit abutments — Designed for bonding to ceramic crowns, bridges, and FCZ implant bridges.

    $50.00

Multi-Unit .050 Hex Prosthetic Screw

  • Titanium final prosthetic screw
  • Torque to 15ncm
  • Available individually or in 10 packs

Multi-Unit UniGrip Prosthetic Screw

  • UniGrip t itanium final prosthetic screw
  • Torque to 15ncm
  • Available individually or in 10 packs

Multi-Unit Long Guide Pin

  • 15mm Long Titanium Pin

Multi-Unit Driver

LOCATOR Attachment for Multi-Unit Abutments

  • Locator attachment designed to fit on all PREAT and Nobel Multi-Unit abutments
  • A simple way of salvaging extremely divergent implants!
  • LOCATOR for Multi-Unit Abutment TI (2-Pack)

    LOCATOR attachment designed to fit on all PREAT and Nobel Biocare Multi-Unit abutments.

    A simple way of salvaging extremely divergent implants!

     

    This listing includes (2) 3.0mm Titanium Collar and (2) LOCATOR abutment. Multi-Unit abutments sold separately.

    $265.00

Find compatible Multi-Unit Implant Abutments below:



Name
Email Address
I am a...
We do not send spam, will not share any of your information, nor will we inundate your inbox!
X
X