Gingivamoll InstructionsPREAT Corporation
Look natural with Gingivamoll!
The bottle of protective lacquer must be CLOSED immediately after each use. Air and warm temperatures thicken the protective lacquer, making a chemical bond on the mask surface impossible. Sealing the cap with wax is helpful to preserve the lacquer.
After applying the lacquer, place the prosthesis at room temperature on a dust-free plate in the oven, increasing the temperature to a maximum of 130 C for 10-15 minutes.
It is possible to correct a defect or tear in the mask. With a defect, such as impression error, a new impression of the appropriate part as well as the model is necessary. Clean the area to be repaired and apply activator liquid. Mix base and activator and apply where necessary on the model. Set the mask in place immediately, cover with a piece of foil, and apply light pressure. Polymerization can be helped by placing the mask in the oven for a few minutes.
Tears can be repaired in a similar manner on the original model.
Gingivamoll should be stored in a refrigerator at 15C / 60F and should be left at room temperature 30 minutes before use.