Laser Products

These attachments have been specially designed for use with Titanium bars.

Technical Resources

Vertix Male in Titanium for laser welding to Titanium Bars.

Titanium alloy with TiN coating. Indicated for use with milled titanium bars.

Save 10% and order 8588-10 (5 packs of 2)

Preci-Profile

Laser welding Titanium profiles for wraparound Acrylic Implant Bridges.
Both straight and curved profiles available.
Height: 2.9mm
Width: 2.0mm
Length: 50mm
Vickers Hardness: 210

Titanium sphere with 1.80mm diameter.

May be incorporated on top, or side of TI bar. TiN coated for maximum hardness.

Total vertical required: 4.0mm
Base Ring: 3.40mm Ø, 1.3mm vertical
Sphere: 2.25mm Ø, 0.9mm internal hex
Housing: Height 2.65mm, 4.00mm Ø

Ceka Sol

Preat Corporation is proud to introduce our new laser line of products for removable partial dentures, overdentures, and implant bar constructions. First are the new filling materials we recommend using with the appropriate laser components.

Titanium sphere with 1.80mm diameter.

May be incorporated on top, or side of TI bar. TiN coated for maximum hardness.

Total vertical required: 4.0mm
Base Ring: 3.40mm Ø, 1.3mm vertical
Sphere: 2.25mm Ø, 0.9mm internal hex
Housing: Height 2.65mm, 4.00mm Ø

Ceka M2 & M3 Revax Attachment

The M2 attachment with the spring pin retention part for laser connection to the cast frame, and the Titanax female for the bonding technique (includes female keepers 30, 45, and 60 degrees). Complete attachment: # RE 0165 TI.

Benefits:

  • Casting may be in any alloy
  • Minimal space requirements
  • No miscast or devesting errors
  • The accurate titanium female insert is bonded in after all other procedures are completed.
  • The abutment crowns and female attachment may be altered if necessary after try-in.
  • A strong laser connection to the cast metal frame is used when vertical space is limited, or the patient exhibits a very strong bite.

Ceka M2 Revax Attachment

Ceka M2 Revax Attachment

Ceka M3 Revax Attachment

Ceka M3 Revax Attachment

Preci Bar for Laser

Preci Bar Laser – Standard and Mini

Preci Bar Laser – Standard and Mini
The Preci Bar, a “U” shaped bar attachment, now has the bar available in Titanium for laser connection.

The rigid Preci Bar Standard (Large) comes with the Titanium bar and an Orax female rider. The standard size bar has a height of 3mm, a length of 50mm, and the diameter is 2.2mm.

The resilient Preci Bar Mini also comes with the Titanium bar and an Orax female rider. The mini bar has a height of 2.3mm, a length of 50mm, and a diameter of 1.6mm.

Both size bars are also available separately. Contact Preat for more information.

Preci Clip/Round Bar for Laser

Preci Clip/Round Bar for Laser
The Preci Clip Bar for Laser is a round bar made of pure titanium for laser connection. The bar is 50mm in length with a diameter of 1.8mm.

The bar is available individually–#1109B–or with 2 ackermann riders. Select either the Orax (gold) riders–#1115–or the Inox (stainless steel) rider–#1116.