Locator Male Removal Tool

$37.00

The Male Removal Tool is used to remove the nylon male from the metal denture cap. The sharp circular edge of the removal tool should be wedged tightly down into the very bottom of the plastic male so that it will catch the inside of the plastic insert and pull it at an angle out of the metal housing. Prior to use, loosen the tip a full 3 turns counter clockwise (you will see a visible gap). To discard the nylon male from the tip of the Core Tool; point the tool down and away from you and tighten the Male Removal Tool clockwise back onto the Core Tool. This will activate the removal pin and dislodge the nylon male from the tip end.

SKU: 4008397 Category:

Additional information

Weight 0.1 lbs
Dimensions 2 × 2 × 2 in
Attachment Category

Attachment System

Attachment Component

Drivers & Tools